Specifications:

Name: Frame heater

Model: CP-19AT

Voltage: 220v/110v

Frequency: 50Hz/60Hz

Power: 550w

Wind speed: 1.8M/s

Temperature value: 80-160 degrees

Working noise: <70db(A)

Application: heating of temples, heating of frames

Packing size: 22.5*21.5*16cm

Weight: 1.6kg

Precautions:

1. Do not heat for too long at one time, shorten the use to extend its life;

2. When the voltage is unstable, please do not use the machine;

3. Do not drip water droplets into the inside, otherwise it will cause circuit failure

and cause the motor to burn;

4. Please check if there is any foreign matter in the air outlet before use;

5. The heater should be placed on a flat table, and the air inlet below should not

be blocked.